If you have a Nissan Navara with a factory Sports Bar and are installing a Load Lid, the sports bar will need to be modified before being installed to the Lid. Please see the below step by step guide and video to see what is required and to ensure this is carried out correctly.
**It is recommended this modification be carried out by a Dealer or Panel-beater where possible.**
Modification Process
Please see the below video for a step by step overview of what is required
Step by Step Instructions
1: Cut welded mounting feet from the bottom of the sports bar
2: Drill 10mm original holes out to a 13mm hole
3: Insert rivnuts (supplied with the lid) into the feet of the bar
4: Carefully place bar onto the Face Plate of the Load-Lid and ensure the bar is centered
5: Place a bead of sealer around the bolt hole to prevent water ingress.
6: Use the bolts supplied to bolt the bar to the Load-Lid. Bolt from the bottom through the holes in the face plates, directly into the threads, that you have placed in the foot of the bar
If you have any questions, please don't hesitate to contact our team!
0800 683 352
sales@utemaster.co.nz