Internal height inside the Tub/ Wellside under a Load-Lid

It is possible to fit a fridge or drawers/toolboxes etc underneath the Load-Lid. For details on dimensions please see below:

The Load-Lid Internal bracing system is in line horizontally with the top edge of the wellside/tub. To work out how much height you will have under the Load-Lid, simply measure from the top lip of your tub down to the floor.

Please note that the locking mechanism cover protrudes 35mm into the tub area, so if you have a fridge slide that is slightly higher you will need to lift the lid to allow it to slide past the locking mechanism cover.

Below is a image showing the location of the locking plate, it is approx 70mm from the back edge of the lid and approx 65mm deep by 35mm high.